Snapping Settings
Specify the snapping targets and workplane grid that apply when pressing Ctrl+Shift.
On the Tools tab, in the
Snapping group, click the Snap Settings icon.
![](../../../../images/feko/user_guide/cadfeko/dialog_snapping_settings.png)
Figure 1. The Snapping settings dialog.
Snapping targets
- Named points
- Geometry (interest points only)
- Geometry surfaces and wires
- Mesh
Workplane / Work surface snap options
You can specify how to snap to points on the workplane.
- Auto grid
- The workplane grid size is determined automatically. You can snap to any point on the grid lattice.
- Continuous
- You can snap to any point on the workplane.
- Fixed grid
- The workplane grid is specified by Size. You can snap to any point on the grid lattice.
![](../../../../images/feko/user_guide/cadfeko/image_workplane_snap_settings.png)
Figure 2. Enable the workplane grid display and tick marks to view the grid lattice.