# SphericalModeSource

A solution spherical modes source.

## Example

application = cf.Application.GetInstance()
project = application:NewProject()

sphericalModesData = project.Definitions.FieldDataList:

-- Create a 'SphericalModeSource' from sphericalModesData

--  Specify the Theta orientation

sphericalModeSource.Theta = 45

-- Delete this 'SphericalModeSource'

sphericalModeSource:Delete()

## Inheritance

The SphericalModeSource object is derived from the Source object.

## Usage locations

The SphericalModeSource object can be accessed from the following locations:

## Property List

BoundingBox
A box indicating the bounding box of this entity. (Read only Box). (Read only Box)
FieldData
The field data that defines the source. (Read/Write FieldData)
Label
LocalWorkplane
Magnitude
The source magnitude scaling factor. (Read/Write ParametricExpression)
Phase
The source phase offset (degrees). (Read/Write ParametricExpression)
Phi
The spherical source Phi orientation (degrees). (Read/Write ParametricExpression)
Position
The Position of the source. (Read/Write LocalCoordinate)
Theta
The spherical source Theta orientation (degrees). (Read/Write ParametricExpression)
Type
The object type string. (Read only string)
Visible
Specifies whether the geometry must be shown or hidden. (Read/Write boolean)

## Collection List

Transforms
The collection of transforms on the operator. (TransformCollection of Transform.)

## Method List

CopyAndMirror (properties table)
Apply a copy and mirror using a table defining the properties. (Returns a Object object.)
CopyAndRotate (properties table, count number)
Apply a copy and rotate using a table defining the properties. (Returns a List of Object object.)
CopyAndRotate (origin Point, rotationaxis Vector, angle number, count number)
Copy and rotate the geometry. (Returns a List of Object object.)
CopyAndTranslate (properties table, count number)
Apply a copy and translate using a table defining the properties. (Returns a List of Object object.)
CopyAndTranslate (from Point, to Point, count number)
Copy and translate the geometry. (Returns a List of Object object.)
Delete ()
Deletes the entity.
Duplicate ()
Duplicates the entity. (Returns a Object object.)
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
SetProperties (properties Object)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.

## Static Function List

GetDefaultProperties ()
Creates a table containing the default settings to create an object. (Returns a table object.)

## Property Details

BoundingBox
A box indicating the bounding box of this entity. (Read only Box).
Type
Box
Access
FieldData
The field data that defines the source.
Type
FieldData
Access
Label
The object label.
Type
string
Access
LocalWorkplane
The source workplane.
Type
LocalWorkplane
Access
Magnitude
The source magnitude scaling factor.
Type
ParametricExpression
Access
Phase
The source phase offset (degrees).
Type
ParametricExpression
Access
Phi
The spherical source Phi orientation (degrees).
Type
ParametricExpression
Access
Position
The Position of the source.
Type
LocalCoordinate
Access
Theta
The spherical source Theta orientation (degrees).
Type
ParametricExpression
Access
Type
The object type string.
Type
string
Access
Visible
Specifies whether the geometry must be shown or hidden.
Type
boolean
Access

## Collection Details

Transforms
The collection of transforms on the operator.
Type
TransformCollection

## Method Details

CopyAndMirror (properties table)
Apply a copy and mirror using a table defining the properties.
Input Parameters
properties(table)
A table of properties defining the mirror transform.
Return
Object
The mirrored geometry.
CopyAndRotate (properties table, count number)
Apply a copy and rotate using a table defining the properties.
Input Parameters
properties(table)
A table of properties defining the rotate transform.
count(number)
The number of transform copies.
Return
List of Object
The list of rotated geometry.
CopyAndRotate (origin Point, rotationaxis Vector, angle number, count number)
Copy and rotate the geometry.
Input Parameters
origin(Point)
The coordinates of the origin of the rotation.
rotationaxis(Vector)
The axis of rotation.
angle(number)
The angle of rotation (degrees).
count(number)
The number of copies.
Return
List of Object
The list of rotated geometry.
CopyAndTranslate (properties table, count number)
Apply a copy and translate using a table defining the properties.
Input Parameters
properties(table)
A table of properties defining the translate transform.
count(number)
The number of transform copies.
Return
List of Object
The list of translated geometry.
CopyAndTranslate (from Point, to Point, count number)
Copy and translate the geometry.
Input Parameters
from(Point)
Translate from coordinate.
to(Point)
Translate to coordinate.
count(number)
The number of copies.
Return
List of Object
The list of translated geometry.
Delete ()
Deletes the entity.
Duplicate ()
Duplicates the entity.
Return
Object
The new (duplicated) entity.
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
Return
table
A table defining the properties.
SetProperties (properties Object)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Input Parameters
properties(Object)
A table of properties defining the new state of the object.

## Static Function Details

GetDefaultProperties ()
Creates a table containing the default settings to create an object.
Return
table
A table containing the default properties.