Properties controlling advanced voxel mesh creation.

## Example

application = cf.Application.GetInstance()
project = application:NewProject()

-- Get the voxel mesher advanced settings

-- Set wire tracing connectivity enabled

advancedSettings.ConnectivityEnsured = true

## Inheritance

The VoxelAdvancedSettings object is derived from the CompositeValue object.

## Usage locations

The VoxelAdvancedSettings object can be accessed from the following locations:

## Property List

AspectRatioLimiting
Control how the voxels' aspect ratios are handled. (Read/Write MeshVoxelAspectRatioOptionsEnum)
AspectRatioThreshold
Specify the upper limit on the aspect ratio of all voxels. A dimensionless fraction [>1]. Only valid if AspectRatioLimiting is Manual. (Read/Write ParametricExpression)
ConnectivityEnsured
Ensure connectivity through wire tracing using the face's edges. (Read/Write boolean)
GrowthRateLimiting
Control how the growth rate between voxels is handled. (Read/Write MeshVoxelGrowthRateOptionsEnum)
GrowthRateThreshold
Specify the upper limit on the growth rate between adjacent voxels. A dimensionless fraction [>1]. Only valid if GrowthRateLimiting is Manual. (Read/Write ParametricExpression)
SmallGeometrySuppression
Control how small geometry details are handled. (Read/Write MeshVoxelSmallGeometryOptionsEnum)
SmallVoxelThreshold
Specify the lower limit on voxel size. A dimensionless fraction (0,1) of the ideal the size determined from electromagnetic properties or specified in VoxelSize. Only valid if SmallGeometrySuppression is Manual. (Read/Write ParametricExpression)

## Property Details

AspectRatioLimiting
Control how the voxels' aspect ratios are handled.
Type
MeshVoxelAspectRatioOptionsEnum
Access
AspectRatioThreshold
Specify the upper limit on the aspect ratio of all voxels. A dimensionless fraction [>1]. Only valid if AspectRatioLimiting is Manual.
Type
ParametricExpression
Access
ConnectivityEnsured
Ensure connectivity through wire tracing using the face's edges.
Type
boolean
Access
GrowthRateLimiting
Control how the growth rate between voxels is handled.
Type
MeshVoxelGrowthRateOptionsEnum
Access
GrowthRateThreshold
Specify the upper limit on the growth rate between adjacent voxels. A dimensionless fraction [>1]. Only valid if GrowthRateLimiting is Manual.
Type
ParametricExpression
Access