Assign Constraints

In this task, you can combine SPCs to form a single SPCADD loadcollector. The Assign Constraints task panel is as shown below.
Figure 1.
You can perform following operations in the Assign Constraints task panel -
  1. Select Subcase - to select the required subcase from a drop down list.
  2. Constraints list table -
    1. All the constraints created in SPC Constraints will be listed in the first table.
    2. Allows you to select constraint(s) to combine.
    3. You can use the selection options in the table.
      1. Select All
      2. Unselect All
      3. Reverse Selection
  3. Add - to create and add the SPCADD cards in the second table.
  4. Update -to update a previously created SPCADD card
  5. Delete Selected and Delete All options to delete the SPCADD cards from the second table.