hmmflow
Translates ASCII files from MF/FLOW, MF/COOL, MF/WARP, MF/GAS. hmmflow also translates .OUT ASCII results files from MOLDFLOW to HyperMesh binary results files.
Syntax
The syntax to translate ASCII files (other than .OUT files) is:
hmmflow [arguments] <input file> (without extensions) <output file> <model file>
The syntax to translate .OUT ASCII files is:
hmmflow -out [other arguments] <input file><output file> <model file>
Application
Translators
Description
.OUT file translation is separate from the translation of other
files. For translating .OUT files, use the
-out option. If both .OUT files and other
ASCII files need to be translated, run
hmmflow twice - once with the -out option
and once without the -out option.
Input
- -flow
- Process results from MF/FLOW
- -cool
- Process results from MF/COOL
- -warp
- Process results from MF/WARP
- -gas
- Process results from MF/GAS
- -pr
- Pressure
- -ft
- Front Temperature
- -ti
- Time
- -it
- Instant Temperature
- -ap
- Air Trap
- -wl
- Weld Lines
- -gf
- Gplentry From
- -msh
- Maximum Shear
- -mst
- Maximum Stress
- -fa
- Flow Angle
- -ev
- Equivalent Viscosity
- -pf
- Percent Frozen
- -tp
- Throughput
- -ct
- Cooling Time
- -sr
- Shear Rate
- -ss
- Shear Stress
- -t
- Temperature
- -mhs
- Maximum Hold Pressure
- -ht
- Hold Time
- -pvs
- Percent Volume Shrink
- -ad
- App. Density
- -bt
- Bottom Temperature
- -tt
- Top Temperature
- -td
- Temperature Difference
- -pat
- Part Average Temperature
- -pmt
- Part Maximum Temperature
- -ptp
- Peak T.Pos
- -tf
- Top Frozen (%)
- -df
- Diff. Frozen (%)
- -rn
- Reynolds Number
- -fr
- Flow Rate
- -cp
- Circular Pressure
- -shpa
- Sh. Parallel
- -shpe
- Sh. Perpendicular
- -shis
- Sh. Isotropic
- -shvo
- Sh. Volume
- -oran
- Oriange (Orientation Angle)
- -dpar
- Cen.Dist.Par
- -dper
- Cen.Dist.Per
- -gt
- Gas Time
- -pp
- Percent Polymer
- -sh
- Shear
- -d
- Displacements
- -r
- Rotations
- -w
- Warp Value
- -gs
- Gauss point stresses (if this option is used, stresses at the 3 gauss points are automatically output)
- -mx
- Moment-x (3 points)
- -my
- Moment-y (3 points)
- -txy
- Twist-xy (3 points)
- -sxz
- Shear-xz (3 points)
- -syz
- Shear-yz (3 points)
- -disk
- Translation is performed on disk
- -size
- Number of entities (10000 default)
- -file
- Scratch file name
- inputfile.fnr
- inputfile.fNN, where NN is a number from 0 to 99.
- inputfile.fer
- inputfile.tNN, where NN is a number from 0 to 99.
- inputfile.pnr
- inputfile.pNN, where NN is a number from 0 to 99.
- inputfile.per
- inputfile.vNN, where NN is a number from 0 to 99.
- inputfile.cep
- inputfile.cem
- inputfile.sev
- inputfile.out
The name of a simulation indicates if it is from MF/FLOW, MF/COOL, MF/WARP, or MF/GAS. The name ends with _F if it is from MF/FLOW, _C if it is from MF/COOL, _W if it is from MF/WARP and _G if it is from MF/GAS.
Only trias and 1D elements are supported.
In the case of model files produced for .OUT files, each element group of the .OUT file corresponds to a HyperMesh component GroupN, where N is the group ID. Each of these groups can be viewed individually by selecting the Display panel from the permanent menu.