ECM - CELLMESH

Cell number exceeds value range representable by ID type.

There are more cells in the computational domain than supported by the solver. Among others, this may be due to incorrect or incompatible input file export, min/max_domain, min/max_boundingbox, inputfile_factor, dx, r_c_dx or cutoff. In rare situations this error means the case is larger than what the solver supports.

Resource limit in #1, #2 (#3,#4,#5) at (#6,#7,#8) in #9

This error suggests that considerable number of particles are concentrated in a certain region of the computational domain positioned about (#6,#7,#8). This error does not point to a specific cause for particle concentration and one should revisit the inputs to the solver. Among different reasons for this error are:

• particles clumping due to compression between moving walls
• too large of a timestep size
• too large of a single phase surface tension coefficient
• incorrect motion definitions
• unusual motion combinations
• kernel dx in cfg doesn't match the actual dx in the discretized geometry
• discretized geometric irregularities
• hanging or overlapping particles

Resource limit in #1, #2 (#3,#4,#5) at (#6,#7,#8) in #9

Refer to previous description.