ESE - SURFEXTS

The phase number requested for extractor S1 to move with is either non-positive or larger than the total number of phases.

The extractor motion phase "extractor_motphs" must be positive and no larger than the total number of phases defined in "phases" section.

The phase requested for extractor S1 to move with is not a moving wall.

The extractor motion phase "extractor_motphs" must point to a MOVINGWALL phase from the "phases" section.

Non-reset HTC is requested for extractor S1 without activating energy transport. Please activate "energy_transport" in "simulationParameters" section.

Calculation of non-reset heat transfer coefficient on extractor faces requires solving energy equation to evolve temperature. As a result, "energy_transport" option in "simulationParameters" section must be turned on.

Both non-reset and reset HTC are requested for extractor S1. Please activate only one option.

Calculation of reset and non-reset heat transfer coefficient on extractor faces are mutually exclusive. Only one of the options, instantaneous or periodically time averaged, may be active at any give time. For example, "extractor_output_htc_rpee_i" and "extractor_output_htc_nrpee_pta" may not be set to true simultaneously for a given simulation.

Both non-reset and reset HTC are requested across at least two different extractors. Please activate only one option across all extractors.

Calculation of reset and non-reset heat transfer coefficient on extractor faces are mutually exclusive. Only one of the options, instantaneous or periodically time averaged, may be active at any give time. For example, "extractor_output_htc_rpee_i" and "extractor_output_htc_nrpee_pta" may not be set to true simultaneously for a given simulation.