Element Summary

The element summary module generates two table outputs with the type, config and count of all 1D, 2D and 3D elements. The table names are Elements 1D Count and Elements 2D 3D Count.

  1. Right-click at the report or chapter level and select Report/Chapter > Add > Modules > Element Summary.
  2. Enter a name for the element summary module.
  3. Enable the Elements 1D Count checkbox to create the 1D elements summary table.
  4. Enable the Elements 2D 3D Count checkbox to create the 2D/3D elements summary table.
    Once executed, a table output for element summary is generated.