*linearsolidsbynodelist

Syntax

*linearsolidsbynodelist mark1 mark2 align1 align2 align3 align4 align5 align6 nodelist

Type

HyperMesh Tcl Modify Command

Description

Creates solid elements between two groups of plane elements, with the layers identified by nodes in a node list.

Inputs

mark1

The ID of the mark containing the first group of plate elements.

mark2

The ID of the mark containing the second group of plate elements.

align1

The ID of the node to be used as an alignment node for the first group of elements.

align2

The ID of the node to be used as an alignment node for the first group of elements.

align3

The ID of the node to be used as an alignment node for the first group of elements.

align4

The ID of the node to be used as an alignment node for the second group of elements.

align5

The ID of the node to be used as an alignment node for the second group of elements.

align6

The ID of the node to be used as an alignment node for the second group of elements.

nodelist

The node list to be used to specify the locations of the layers.

Example

To create 8 layers of solids between plates 10, 11, 12, 13 and 20, 21, 22, 23 using, as alignment nodes, nodes 5 and 13, and as layer-specifying nodes, 5, 6, 7, 8, 9, 10, 11, 12, 13:

*createmark element 1 10 11 12 13
*createmark element 2 20 21 22 23
*createlist nodes 1 5 6 7 8 9 10 11 12 13
*linearsolidsbynodelist 1 2 5 0 0 13 0 0 1 

The nodelist nodes should begin with one belonging to an element on the first element mark and end with a corresponding one belonging to an element on the second element mark.

Errors

None.