*surfacemarkclipwithline

Splits a group of surfaces with a line by projecting that line perpendicularly onto the surfaces.

Syntax

*surfacemarkclipwithline mark line tolerance

Type

HyperMesh Tcl Modify Command

Description

Splits a group of surfaces with a line by projecting that line perpendicularly onto the surfaces.

Inputs

mark
The mark ID containing the surfaces.
line
The ID of the line used to split the surfaces.
tolerance
The maximum distance the line may deviate from the surfaces and still be projected.

Example

To split two surfaces using line number 26 and a projection tolerance of 0.1:
*createmark surfaces 1 171 172
*surfacemarkclipwithline 1 26 0.1