Building a Full Vehicle Model with Advanced Drivers
Next we will go step by step from one window to another and explain the available options in each window to have a better understanding of the Assembly Wizard’s Full Truck with Advanced Driver model type.
- Select the Full vehicle with advanced driver option from the Model Type window and click Next.
-
Select the Front wheel drive option for the model and click
Next.
-
Select the primary systems for the model as shown in the following image and
click Next.
-
Select the steering subsystems for the model as shown in the following image
and click Next.
-
Select the springs, dampers, and stabars for the model as shown in the
following image and click Next.
-
Select the jounce and rebound bumpers for the model as shown in the following
image and click Next.
-
Select the disk brakes and front drivelines for the model as shown in the
following image and click Next.
-
Now, select the Advanced Driver system and click
Next.
Note: The Advanced Driver is now included as a system.
-
Now that you have selected all the required systems for the model, click the
Finish button to complete the assembly process and
exit the Assembly Wizard.
Note: Click Attachments button to proceed with the Attachment Wizard.
-
The Full Truck with Advanced Driver model built through the Assembly Wizard is
displayed in the graphics area.
- The subsystems you have selected in the Assembly Wizard to build the model are displayed in the Project Browser.