SnRD Pre Model Preparation

SnRD Pre-Processing module, provides a guided process for the creation of entities (elements, load collectors and so on) that are specific to SnR input deck creation. During the process, these entities are reflected in core HyperMesh model browser.

The steps to launch SnRD are explained below.
  1. Launch HyperMesh Desktop 2022 from installed location.

    HyperMesh Desktop 2022will open and user interface will be displayed as shown below.

    Figure 1.
  2. Click Directors > SNRD
    Figure 2.
  3. All the pre processing tasks will be loaded and displayed in the SNR-Pre tab.
    Figure 3.
    The next step in the process is to define the Process Parameters.