# PFPANEL

I/O Options and Subcase Information Entry The PFPANEL command can be used in the I/O Options section to request output of acoustic panel participation factors for all Modal Frequency Response subcases.

## Format

PFPANEL (PANEL=setp, FREQUENCY=setf, outfile,peakout,form) = setdof/PEAKOUT

## Examples

PFPANEL(PANEL=ALL,FREQUENCY=45)=12
PFPANEL(H3D, PEAKOUT)=56
PFPANEL(H3D, PEAKOUT)=PEAKOUT
PFPANEL(PUNCH, PHASE)=32

## Definitions

Argument Options Description
setp <ALL, NONE>

Default = NONE

ALL
Output acoustic panel participation for all panels.
NONE
Do not output acoustic panel participation.
setf <ALL, SID>

Default = SID

ALL
Participation factors are processed for all excitation frequencies.
SID
Participation factors are only processed for a set of excitation frequencies. SID refers to the ID of a SET of type FREQ.
outfile <PUNCH, H3D, HDF5>

Default = H3D

Panel participation can be exported either into an H3D, PUNCH or HDF5 file. Because of the large volume of data, it is recommended to export the panel participation data into a H3D file. 5
form <REAL, IMAG, PHASE>
REAL or IMAG
Provides rectangular format (real and imaginary) of complex output.
PHASE
Provides polar format (magnitude and phase) of complex output. Phase output is in degrees.
peakout If peakout is present as an option inside the parentheses of the PFPANEL data, the filtered frequencies from the peakout data will be considered for output of panel participation.
setdof/PEAKOUT <SID/PEAKOUT> Degrees-of-freedom for which the panel participation factors are to be processed. SID refers to the ID of a SET of type GRID. If peakout is specified instead of SID, the output will be considered at the filtered frequencies corresponding to the degree-of-freedom in the peakout card in the bulk section.