nanoFluidX
  • A
    • adhesion model and single phase surface tension[1][2]
  • B
    • backward-facing step in 2d validation case[1]
    • basic usage[1]
    • bibliography[1]
  • C
    • cleanup for sph[1]
    • command reference[1]
    • contact angle[1]
    • containers[1]
  • D
    • dam break in 3D validation case[1]
    • data check[1]
    • domain parameters[1][2]
    • drivetrain oiling simulation[1][2]
    • dye regions parameters[1]
  • E
    • ECM - CELLMESH[1]
    • EDM - DOMAIN[1]
    • EDR - DYEREGIONS[1]
    • EFS - FRAMESUITE[1]
    • EIM - IMPOSEREGIONS[1]
    • EIO - INPUTOUTPUT[1]
    • EIR - INLET REGIONS[1]
    • EKR - KERNEL[1]
    • EMT - MOTIONS[1]
    • enable the nanoFluidX toolbar plugin[1]
    • energy equation[1]
    • EOR - OUTLETREGIONS[1]
    • EPH - PHASES[1]
    • EPR - PROBES[1]
    • error and warning messages[1]
    • errors[1]
    • ERT - RUNTIME[1]
    • ESE - SURFEXTS[1]
    • ESP - SIMPARAM[1]
    • EVS - VISCTEMP[1]
    • experimental validation - DSD case[1]
    • experimental validation - PIV experiments[1]
    • expert, beginner, novice[1]
    • export[1]
    • extractor definitions[1]
    • extractor output description[1]
  • F
    • faq[1]
      • containers[1]
      • general[1]
      • multi-node jobs in nanoFluidX 2021 or older[1]
    • fluid library[1]
    • frame suite[1]
    • frame suite parameters[1]
    • free surface formulation[1]
    • frequently asked questions[1]
  • G
  • H
    • heat transfer coefficient, htc[1]
    • HyperWorks[1]
  • I
    • imposed motions[1]
    • impose regions definitions[1]
    • inlet region[1]
    • inlet regions[1]
    • interactive examples[1]
  • J
    • jet impinging on a spring-loaded plate[1]
  • K
    • kernel parameters[1]
    • keychain validator[1]
  • L
    • laplace law for surface tension validation case[1]
    • launch simulation[1]
    • launch simulation via pbs access[1]
    • launch simulation via terminal[1]
    • launch simulation via windows terminal[1]
    • lid-driven cavity in 2d validation case[1]
    • load balancing parameters[1]
    • load nfx results[1]
  • M
    • mass flow rate probe particles[1]
    • material library loading[1]
    • motion
      • CONROD[1]
      • PASSIVE_RIGID_BODY[1]
      • POSITION_FILE[1]
    • motions[1]
    • multi-gpu scaling[1]
    • multi-node jobs in nanoFluidX 2021 or older[1]
    • multi-node jobs in nanoFluidX 2022.1 or newer[1]
    • multiphase surface tension[1]
  • N
    • nanoFluidX auxiliary tools for ParaView[1]
    • nanoFluidX companion, nFX[c][1]
    • nanoFluidX companion - nFX[c][1]
    • nanoFluidX introduction[1]
    • nanoFluidX monitor, nFX[m][1]
    • nanoFluidX monitor - nFX[m][1]
    • nanoFluidX prep - nFX[p][1]
    • NFX-T: 1000 Simple Gearbox[1]
    • non-interactive examples[1]
    • NVIDIA V100 versus NVIDIA A40[1]
    • NVIDIA V100 versus NVIDIA Volta RTX 8000[1]
    • NVIDIA V100 Volta versus NVIDIA A100 ampere[1]
  • O
  • P
    • paraview[1]
    • particle generation[1]
    • particle interaction scheme[1]
    • performance benchmarks[1]
    • phase parameters[1]
    • platform and hardware requirements[1]
      • hardware requirements[1]
      • supported platforms[1]
    • post-process with paraview[1]
    • preprocessing with SimLab[1]
    • probe definitions[1]
  • R
    • references[1]
    • restart options[1][2]
    • riemann particle interaction scheme[1]
    • run nanoFluidX[1]
  • S
    • SimLab settings and customization[1]
    • simulation environment[1]
    • simulation guidance[1]
    • simulation parameters[1]
    • single or double precision[1]
    • sph flow solution[1][2][3]
    • sub-phasing[1]
  • T
    • theory manual[1]
      • boundary conditions[1]
      • measurements[1]
      • physics[1]
      • solver settings[1]
    • transport velocity formulation[1]
    • troubleshooting[1]
    • tutorial - paraview post-processing in-plane streamlines and vectors[1]
    • tutorial - paraview rendering[1]
  • U
    • use check_nFX.sh script[1]
  • V
    • validation cases[1]
    • varying body force (acceleration)[1]
    • video tutorials[1][2]
    • viscosity modeling non-Newtonian temperature-viscosity coupling[1]
    • viscosity models theory[1]
  • W
    • WARNINGS[1]
    • WCM - CELLMESH[1]
    • WDM - DOMAIN[1]
    • WEIGHTED and RIEMANN solver options[1]
    • WFS - FRAMESUITE[1]
    • WIM - IMPOSEREGIONS[1]
    • WIO - INPUTOUTPUT[1]
    • WIR - INLET REGIONS[1]
    • WMT - MOTIONS[1]
    • WOR - OUTLETREGIONS[1]
    • WPH - PHASES[1]
    • WPR - PROBES[1]
    • WSE - SURFEXTS[1]
    • WSP - SIMPARAM[1]