By Width
Use the By Width option in the Extended Entity Selection menu to select surfaces based on their width.
By Example Subpanel
Use the By Example subpanel to select a sample surface and find the surfaces in your
model with similar widths.
| Option | Action |
|---|---|
| surf | Select a sample surface. |
| closed loops only | Systematically disregard surfaces that do not form a closed loop. |
| has free edges | Surfaces must have at least one free edge to be selected. |
By Value Subpanel
Use the By Value subpanel to specify a range of values for width and find the
surfaces that match this range, while taking into account any filtering options that
are enabled.
| Option | Action |
|---|---|
| min width | Enter the minimum width of the surface to find. |
| max width | Enter the maximum width of the surface to find. |
| has free edges | Surfaces must have at least one free edge to be selected. |
Command Buttons
| Button | Action |
|---|---|
| select | Select the surfaces highlighted. |
| reject | Reject the current selections. |
| return | Exit the panel. |