SPCADD Creation

You can create SPCADD load collectors using the SPCADD panel. Below is the panel for the task.

Figure 1.

The operations that can be performed on this panel are:

1. Subcase - select the required subcase from a drop-down list.
2. Select required SPC from the list
   1. Select All
   2. Unselect All
   3. Reverse Selection
3. Add - create and add the SPCADD cards in the second table.
4. Refresh - refresh the table data.
5. Update -update a previously created SPCADD card
6. Delete Selected and Delete All options to delete the SPCADD cards from the second table.