Modal Damping Creation Tutorial
Create Modal Damping
- Select CRIT from the Damping Type drop- down list.
-
Click
twice to insert two rows in the damping table.
Note: You can create the complete damping table using this method. -
Enter the values in the X and Y columns, as shown below
X Y 0.0 0.04 200 0.04 -
Click Add.
The damping table is created and listed in the adjacent table.
Figure 1. - Click the radio button corresponding to the required damping table to activate it.
-
Click Next to proceed to the
next step in the process.
Note: You should create and activate at least one damping table in this panel before moving to the next step.