Normal Mode Extraction Tutorial
Create New Load Collectors
-
Choose the Demo subcase from the Select Subcase drop-down list.
- Select EIGRA from the Method list.
- Enter 0.0 in the Min freq (Hz) field.
- Enter 200 in the Max freq (Hz) field.
- Enter 10 for the number of modes to be extracted in the No of modes field.
-
Click Create.
A new load collector is created and listed in the load collector table.
- Click the radio button corresponding a load collector.
-
Click Next to proceed to the
next step in the process.
Note: For each of the subcases that were created in the Modal Transient Subcase Creation step, it is necessary to have at least one load collector selected.