FEMLineMeshPort

A FEM line mesh port is used to define the location of an impressed current source and load in the FEM region.

Example

application = cf.Application.getInstance()
project = application:NewProject()

    -- Create a 'FEMLineMeshPort' between the points (0,0,0) and (1,1,0)

femLineMeshPort = project.Contents.Ports:AddFEMLineMeshPortBetweenPoints(cf.Point(0,0,0) ,cf.Point(1,1,0) )

Inheritance

The FEMLineMeshPort object is derived from the AbstractFEMLinePort object.

Usage locations

The FEMLineMeshPort object can be accessed from the following locations:

Property List

BoundingBox
A box indicating the bounding box of this entity. (Read only Box). (Read only Box)
DefinitionMethod
The FEM line mesh port type definition. (Read/Write FEMLineMeshPortDefinitionMethodEnum)
End
The end point of the port. Only valid if DefinitionMethod is UsingPoints. (Read/Write GlobalCoordinates)
EndVertex
The end vertex of the port. Only valid if DefinitionMethod is UsingVertices. (Read/Write MeshVertexReference)
Label
The object label. (Read/Write string)
LocalWorkplane
The source workplane. (Read/Write LocalWorkplane)
Schematic
The schematic associated with this item. (Read only Schematic)
SchematicLocation
The location of the item on the schematic. (Read only GridLocation)
SchematicRotation
The rotation of the item on the schematic. (Read only SymbolRotationEnum)
Start
The start point of the port. Only valid if DefinitionMethod is UsingPoints. (Read/Write GlobalCoordinates)
StartVertex
The start vertex of the port. Only valid if DefinitionMethod is UsingVertices. (Read/Write MeshVertexReference)
Terminals
The schematic terminals on this item. (Read only List of Terminal)
Type
The object type string. (Read only string)
Visible
Specifies whether the geometry must be shown or hidden. (Read/Write boolean)

Collection List

Transforms
The collection of transforms on the operator. (TransformCollection of Transform.)

Method List

CopyAndMirror (properties table)
Apply a copy and mirror using a table defining the properties. (Returns a List of Object object.)
CopyAndRotate (properties table, count number)
Apply a copy and rotate using a table defining the properties. (Returns a List of Object object.)
CopyAndRotate (origin Point, rotationaxis Vector, angle number, count number)
Copy and rotate the geometry. (Returns a List of Object object.)
CopyAndTranslate (properties table, count number)
Apply a copy and translate using a table defining the properties. (Returns a List of Object object.)
CopyAndTranslate (from Point, to Point, count number)
Copy and translate the geometry. (Returns a List of Object object.)
Delete ()
Deletes the entity.
Duplicate ()
Duplicates the entity. (Returns a Object object.)
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
RotateSchematicSymbol ()
Rotates the item on the schematic.
SetProperties (properties Object)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
SetSchematicLocation (location GridLocation)
Sets the location of the item on the schematic.
SetSchematicRotation (rotation SymbolRotationEnum)
Sets the rotation of the item on the schematic.

Static Function List

GetDefaultProperties ()
Creates a table containing the default settings to create an object. (Returns a table object.)

Property Details

BoundingBox
A box indicating the bounding box of this entity. (Read only Box).
Type
Box
Access
Read only
DefinitionMethod
The FEM line mesh port type definition.
Type
FEMLineMeshPortDefinitionMethodEnum
Access
Read/Write
End
The end point of the port. Only valid if DefinitionMethod is UsingPoints.
Type
GlobalCoordinates
Access
Read/Write
EndVertex
The end vertex of the port. Only valid if DefinitionMethod is UsingVertices.
Type
MeshVertexReference
Access
Read/Write
Label
The object label.
Type
string
Access
Read/Write
LocalWorkplane
The source workplane.
Type
LocalWorkplane
Access
Read/Write
Schematic
The schematic associated with this item.
Type
Schematic
Access
Read only
SchematicLocation
The location of the item on the schematic.
Type
GridLocation
Access
Read only
SchematicRotation
The rotation of the item on the schematic.
Type
SymbolRotationEnum
Access
Read only
Start
The start point of the port. Only valid if DefinitionMethod is UsingPoints.
Type
GlobalCoordinates
Access
Read/Write
StartVertex
The start vertex of the port. Only valid if DefinitionMethod is UsingVertices.
Type
MeshVertexReference
Access
Read/Write
Terminals
The schematic terminals on this item.
Access
Read only
Type
The object type string.
Type
string
Access
Read only
Visible
Specifies whether the geometry must be shown or hidden.
Type
boolean
Access
Read/Write

Collection Details

Transforms
The collection of transforms on the operator.
Type
TransformCollection

Method Details

CopyAndMirror (properties table)
Apply a copy and mirror using a table defining the properties.
Input Parameters
properties(table)
A table of properties defining the mirror transform.
Return
List of Object
The mirrored geometry.
CopyAndRotate (properties table, count number)
Apply a copy and rotate using a table defining the properties.
Input Parameters
properties(table)
A table of properties defining the rotate transform.
count(number)
The number of transform copies.
Return
List of Object
The list of rotated geometry.
CopyAndRotate (origin Point, rotationaxis Vector, angle number, count number)
Copy and rotate the geometry.
Input Parameters
origin(Point)
The coordinates of the origin of the rotation.
rotationaxis(Vector)
The axis of rotation.
angle(number)
The angle of rotation (degrees).
count(number)
The number of copies.
Return
List of Object
The list of rotated geometry.
CopyAndTranslate (properties table, count number)
Apply a copy and translate using a table defining the properties.
Input Parameters
properties(table)
A table of properties defining the translate transform.
count(number)
The number of transform copies.
Return
List of Object
The list of translated geometry.
CopyAndTranslate (from Point, to Point, count number)
Copy and translate the geometry.
Input Parameters
from(Point)
Translate from coordinate.
to(Point)
Translate to coordinate.
count(number)
The number of copies.
Return
List of Object
The list of translated geometry.
Delete ()
Deletes the entity.
Duplicate ()
Duplicates the entity.
Return
Object
The new (duplicated) entity.
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
Return
table
A table defining the properties.
RotateSchematicSymbol ()
Rotates the item on the schematic.
SetProperties (properties Object)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Input Parameters
properties(Object)
A table of properties defining the new state of the object.
SetSchematicLocation (location GridLocation)
Sets the location of the item on the schematic.
Input Parameters
location(GridLocation)
The schematic location the item should be moved to.
SetSchematicRotation (rotation SymbolRotationEnum)
Sets the rotation of the item on the schematic.
Input Parameters
rotation(SymbolRotationEnum)
The rotation setting.

Static Function Details

GetDefaultProperties ()
Creates a table containing the default settings to create an object.
Return
table
A table containing the default properties.