GlobalPlane

The global coordinate system plane.

Example

application = cf.Application.getInstance()
project = application:NewProject()

    -- Create a flare

baseCentre = cf.Point(-0.25, -0.25, 0)
flare = project.Contents.Geometry:AddFlare(baseCentre, 0.5, 0.5, 1.0, 0.3, 0.3)

    -- Modify the local workplane of the flare

flare.LocalWorkplane.WorkplaneDefinitionOption = cf.Enums.LocalWorkplaneDefinitionEnum.UseCustomDefinedWorkplane
lwp = flare.LocalWorkplane.LocalDefinedWorkplane
lwp.Origin.X = 1
lwp.Origin.Z = .3
lwp.UVector.Y = 1
lwp.VVector.Z = -2
assert("TODO")

Inheritance

The GlobalPlane object is derived from the CompositeValue object.

Usage locations

The GlobalPlane object can be accessed from the following locations:

Property List

Origin
The plane origin. (Read/Write GlobalOrigin)
UVector
The plane U vector orientation. (Read/Write GlobalVector)
VVector
The plane V vector orientation. (Read/Write GlobalVector)

Property Details

Origin
The plane origin.
Type
GlobalOrigin
Access
Read/Write
UVector
The plane U vector orientation.
Type
GlobalVector
Access
Read/Write
VVector
The plane V vector orientation.
Type
GlobalVector
Access
Read/Write