SParameterOptimisationGoal

An S-parameter optimisation goal.

Example

application = cf.Application.getInstance()
project = application:NewProject()
search = project.Optimisation.Searches:Add(cf.Enums.OptimisationMethodTypeEnum.GridSearch)

    -- Create an S-parameter optimisation goal with focus on a request with label 'SParameter'

properties = cf.SParameterOptimisationGoal.GetDefaultProperties()
properties.FocusSourceLabel = "SParameter"
properties.FocusSourceType = cf.Enums.OptimisationFocusSourceTypeEnum.FocusSourceByLabel
properties.GoalOperator = cf.Enums.OptimisationGoalOperatorEnum.LessThan
properties.InputPort = 2
properties.Objective.TargetValue = "1.5"
properties.ProcessingSteps[1].Operation = cf.Enums.OptimisationGoalProcessingStepsEnum.Magnitude
sParameterGoal = search.Goals:AddSParameterGoal(properties)

    -- Set the output port number to 1

sParameterGoal.OutputPortSpecified = true
sParameterGoal.OutputPort = 1

Inheritance

The SParameterOptimisationGoal object is derived from the OptimisationGoal object.

Usage locations

The SParameterOptimisationGoal object can be accessed from the following locations:

Property List

FocusSource
Set the focus source to a specified source object. The intended usage is for when the source is defined in CADFEKO. (Read/Write Object)
FocusSourceLabel
Set the source focus label. The intended usage is for when the source is defined only in EDITFEKO. (Read/Write string)
FocusType
Set the focus type. (Read/Write OptimisationSParameterFocusTypeEnum)
GoalOperator
The goal operator indicates the desired relationship between the goal focus and the objective. (Read/Write OptimisationGoalOperatorEnum)
InputPort
Input port number (n). Changing this property will set InputPortSpecified to true. (Read/Write number)
InputPortSpecified
Specify input port enabled. (Read/Write boolean)
Label
The object label. (Read/Write string)
Objective
The objective describes a state that the optimisation process should attempt to achieve. (Read only OptimisationGoalObjective)
OutputPort
Output port number (m). Changing this property will set OutputPortSpecified to true. (Read/Write number)
OutputPortSpecified
Specify output port enabled. (Read/Write boolean)
ProcessingSteps
A number of conversion steps or mathematical operations to be carried out on the goal focus before the goal is evaluated. (Read/Write OptimisationGoalProcessingStepsList)
Type
The object type string. (Read only string)
Weight
Specify the optimisation weight. (Read/Write ParametricExpression)

Method List

Delete ()
Deletes the entity.
Duplicate ()
Duplicates the entity. (Returns a Object object.)
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
SetProperties (properties Object)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.

Static Function List

GetDefaultProperties ()
Creates a table containing the default settings to create an object. (Returns a table object.)

Property Details

FocusSource
Set the focus source to a specified source object. The intended usage is for when the source is defined in CADFEKO.
Type
Object
Access
Read/Write
FocusSourceLabel
Set the source focus label. The intended usage is for when the source is defined only in EDITFEKO.
Type
string
Access
Read/Write
FocusType
Set the focus type.
Type
OptimisationSParameterFocusTypeEnum
Access
Read/Write
GoalOperator
The goal operator indicates the desired relationship between the goal focus and the objective.
Type
OptimisationGoalOperatorEnum
Access
Read/Write
InputPort
Input port number (n). Changing this property will set InputPortSpecified to true.
Type
number
Access
Read/Write
InputPortSpecified
Specify input port enabled.
Type
boolean
Access
Read/Write
Label
The object label.
Type
string
Access
Read/Write
Objective
The objective describes a state that the optimisation process should attempt to achieve.
Type
OptimisationGoalObjective
Access
Read only
OutputPort
Output port number (m). Changing this property will set OutputPortSpecified to true.
Type
number
Access
Read/Write
OutputPortSpecified
Specify output port enabled.
Type
boolean
Access
Read/Write
ProcessingSteps
A number of conversion steps or mathematical operations to be carried out on the goal focus before the goal is evaluated.
Type
OptimisationGoalProcessingStepsList
Access
Read/Write
Type
The object type string.
Type
string
Access
Read only
Weight
Specify the optimisation weight.
Type
ParametricExpression
Access
Read/Write

Method Details

Delete ()
Deletes the entity.
Duplicate ()
Duplicates the entity.
Return
Object
The new (duplicated) entity.
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
Return
table
A table defining the properties.
SetProperties (properties Object)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Input Parameters
properties(Object)
A table of properties defining the new state of the object.

Static Function Details

GetDefaultProperties ()
Creates a table containing the default settings to create an object.
Return
table
A table containing the default properties.