Bulk Data Entry Defines a combined time step selection set as a union of selected time steps defined via ESLTIME entries for Geometric Nonlinear ESLM optimization or a Multibody Dynamics ESLM optimization.


(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
ESLTADD SID S1 S2 S3 S4 S5 S6 S7  
  S8 S9 etc.            


(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
ESLTADD 101 9 11 13          


Field Contents SI Unit Example
SID Set identification number.

(Integer > 0)

Si Set identification numbers of time step selections defined via ESLTIME Bulk Data Entries. Si should be unique and may not be the identification number of a set defined by another ESLTADD entry.

(Integer > 0)



  1. ESLTADD can be selected within the Subcase Information section using the command ESLTIME=SID.
  2. ESLTADD entries take precedence over ESLTIME entries. If both entries have the same SID, only the ESLTADD entry will be used.
  3. This card is represented as a load collector in HyperMesh.