*CE_DetailSetTripleByMark

Sets a triple connector detail for a mark of connectors.

Syntax

*CE_DetailSetTripleByMark mark_id detail_name triple_value1 triple_value2 triple_value3 reserved force_storage

HyperMesh Tcl Modify Command

Sets a triple connector detail for a mark of connectors.

mark_id: The ID of mark containing the connectors to update. Valid values are 1 and 2.
detail_name: The name of the standard triple detail, or user-defined triple detail, to update. See *CE_DetailSetTriple for valid details.
triple_value1: The first triple value to update for the detail.
triple_value2: The second triple value to update for the detail.
triple_value3: The third triple value to update for the detail.
reserved: Reserved for future use. Must be set to 0.
force_storage: 0 - Do not store user-defined detail.; 1 - Store user-defined detail.

To set the projection vector to (0.0, 1.0, 0.0) for connectors 1, 2 and 3:

*createmark connectors 1 1 2 3
*CE_DetailSetTripleByMark 1 ce_ijk 0.0 1.0 0.0 0 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}