*external_skin_extraction

Detects leaks and extracts exposed exterior or interior faces and surfaces.

Syntax

*external_skin_extraction entity_type mark_id mode min_size max_size extraction_mode seed_point_coordinates target_point_coordinates baffle_detection min_surface_area

Type

HyperMesh Tcl Modify Command

Description

Detects leaks and extracts exposed exterior or interior faces and surfaces.

Inputs

entity_type: The type of entities to consider. Valid values are elements and surfaces.
mark_id: The ID of the mark containing the input entities. Valid values are 1 and 2.
mode: The detection mode.; 1 - Leak detection only; 2 - Leak detection with skin extraction. If a leak is detected, the skin is not extracted.; 3 - Skin extraction without leak detection.
min_size: Leaks smaller than min_size will be ignored. Higher min_size values can lead to longer skin extraction time.
max_size: This value should be set to 0.0.
extraction_mode: The extraction mode.; 1 - Exterior skin extraction.; 2 - Interior (cavity) skin extraction.
seed_point_coordinates: String containing the x, y, z coordinates of the seed point defined within the target volume for leak detection. The point should be located inside the cavity, not close to the volume boundaries.
target_point_coordinates: String containing the x, y, z coordinates of the seed point defined outside the target volume for leak detection. The point should be located outside the cavity not close to the volume boundaries.
baffle_detection: The baffle detection mode.; 0 – No baffles detected.; 1 – Only external baffles are detected.; 2 – Only internal baffles are detected.; 3 – Both external and internal baffles are detected.
min_surface_area: Defines the percentage of the skin area. For surface input, if the exposed area of the detected surfaces is less than the user-defined percentage of the total area, the surfaces are not marked as skin.

Example

To detect a leak bigger than 20.0 and extract the exterior skin from displayed elements defining a volume around a point with coordinates (2690.0 0.0 830.0) with minimal surface area set to 10 %:

*createmark elements 1 "displayed"
*external_skin_extraction elements 1 2 20.0 0.0 1 10 "2690.0 0.0 830.0"

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

2021.1

2021.2 - Added new arguments target_point_coordinates and baffle_detection.