*morphmapnormaloffset

Offset elements on mark in normal direction.

Syntax

*morphmapnormaloffset typeelem markelem typefix markfix sym con blend offset umark

Type

HyperMesh Tcl Modify Command

Description

Offset elements on mark in normal direction.

Inputs

typeelem: Elems
markelem: Mark number of elements to map
typefix: Nodes
markfix: Mark number of fixed nodes
sym: 0 - Do not use symmetry (only option)
con: 0 - Do not use constraints; 1 - Use constraints
blend: 0 - Do no blend unselected nodes; 1 - Blend nodes between mapped and fixed nodes
offset: Distance to offset elements
umark: 0 - Use all elements to calculate normals; 1 - Use selected elements to calculate normals; 2 - Use CFD corners; Adding 10 to any value use only elements on mark for normal calculation. Otherwise, all elements are used.

Example

*morphmapnormaloffset ELEMS 1 NODES 1 0 1 0 10.0 1

If blend is on, no fixed nodes have been selected, and no mapped nodes are a part of any domain, this command will automatically assign all non-mapped nodes as fixed nodes.

Errors

None.