*reviewsystem

Reads and plots the x-axis of the element (material) coordinate system for selected elements.

Syntax

*reviewsystem markmask onlyorient normal_size color

HyperMesh Tcl Modify Command

Reads and plots the x-axis of the element (material) coordinate system for selected elements.

markmask: Determines the selected elements.
onlyorient: If onlyorient = 1, the new x-element directions are displayed as vectors starting from the element center.; If onlyorient = 0, the new x-element directions are shown as continuous gradient lines starting and ending on free edges.
normal_size: If onlyorient = 1, it determines the size of the vectors to be displayed.
color: Determines the color of the vector or line. The color ID numbers range from 1 to 64.

To review the element (material) coordinate system of four selected elements and display them as blue vectors (color 7) with size = 3:

*createmark(elements,2) 304 305 316 1841

*reviewsystem(2,1,3,7)

*vectorsoff()

The *createmark() and *vectorsoff() commands are required.

None.