*elementqualityplacenodenew

Moves the specified node to a target point.

Syntax

*elementqualityplacenodenew node_id x y z normal_flag boundary_flag midnodes_flag

HyperMesh Tcl Modify Command

This command moves the specified node to a target point.

This command only functions between an *elementqualitysetup command and an *elementqualityshutdown command.

node_id: The node ID.
x: The x-coordinate of the target point.
y: The y-coordinate of the target point.
z: The z-coordinate of the target point.
normal_flag: 0 - Allow movement along the surface.; 1 - Allow movement normal to the surface.
boundary_flag: 0 - Allow movement within the boundary.; 1 - Allow movement out of the boundary.
midnodes_flag: 0 - Do not consider neighboring mid-nodes during optimization.; 1 - Consider neighboring mid-nodes during optimization.

To place the node with ID 102, using a target point of 10.0, 5.0, 0.0, allowing normal movement within the boundary:

*createmark elems 1 displayed
*elementqualitysetup 1
*elementqualityplacenodenew 102 10.0 5.0 0.0 1 0 0
*elementqualityshutdown 1

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

12.0.110