*CurrentTimeStep()
Specifies the timestep displayed in the windows on a page.
Syntax
*CurrentTimeStep (Time, MODEL_STEP, INITIAL_STATIC_STEP, UNDEFINED_STEP)
Application
HyperView and MediaView
Inputs
- Time
- The time to display in each window.
- MODEL_STEP
- For an ADAMS model, the time step before loads are applied.
- INITIAL_STATIC_STEP
- For an ADAMS model, the time step where loads are applied but the simulation has not yet started.
- UNDEFINED_STEP
- Time value has not been set. This can occur if no results are loaded.
Context
*BeginPage()
Example
*BeginPage()
*IsActive()
*Title("Force-5", On)
*Layout(1)
*BeginWindow(Plot)
*IsActive()
• • •
*EndWindow()
*CurrentTimeStep(0)
*EndPage()
Or
*BeginPage()
*IsActive()
*Title("Force-5", On)
*Layout(1)
*BeginWindow(Plot)
*IsActive()
• • •
*EndWindow()
*CurrentTimeStep(MODEL_STEP)
*EndPage()
Comments
The same timestep is displayed in every window on the page. If the specified timestep is not available for a window, the closest timestep without exceeding the current timestep is displayed.
timestep is in microseconds (mms).