*Origin()

Specifies the origin settings for the added part.

Syntax

*Origin (X_Value, Y_Value, Z_Value)

Application

HyperView

Inputs

X_Value: The value with which the added object is oriented in the X direction.
Y_Value: The value with which the added object is oriented in the Y direction.
Z_Value: The value with which the added object is oriented in the Z direction.

Example

*Origin("2059.999268 2059.999756 0.000389")

Comments

This statement captures the orientation of the added part in the X, Y and Z direction. This statement is written out only if this value has been changed by the user.