*Rotation()
Specifies the rotation setting for the added part.
Syntax
*Rotation (RX_Value, RY_Value, RZ_Value)
Application
HyperView
Inputs
- RX_Value
- Rotation in the X-direction.
- RY_Value
- Rotation in the Y-direction.
- RZ_Value
- Rotation in the Z-direction.
Example
*Rotation("0.000000 0.000000 -179.999985")
Comments
This statement captures the rotation of the added part in the X, Y, and Z directions. This statement is written out only if this value has been changed by the user.