Configure GeoD-Post

Steps to configure GeoD-Post.

1. Load the demo-eff.h3d in HyperView.
2. Launch GeoD-Post.
3. From the menu bar open File > Preferences and select Stress Manipulation.
4. Make sure checkboxes for Regime stress ratio and mean horizontal stress are selected.

   
   
   Figure 1.

5. In the GeoD results browser, expand the scalar grouping and verify that Regime stress ratio and Mean horizontal parameters are suffixed with **.
6. Select the contour icon for these parameters.
   The contour becomes active in the graphics area.
   Now the ** icon disappears, which implies that the derived result is created and available in the HV results browser.

   
   
   Figure 2.