Radioss Panel
Use the Radioss panel to execute a Radioss run on your desktop from HyperMesh.
Panel Options
Option | Action |
---|---|
input file: | Navigate to the desired input file. |
export options | Select an export
option before you execute a Radioss
run.
|
run options | Select a run option
before you execute an Radioss
run.
|
memory options | Specify the memory
limit, and decide whether or not to run an in-core or
out-of-core solution depends. The memory default can be changed using the system setting (SYSSETTING) option OS_RAM. You can assign a different memory limit for an individual run by entering a value for memory in upper limit in Mb= or by defining the -len option in the run script. |
include connectors | Include predefined connectors in the output file. |
options: | Specify any additional options to write to the solver. |
Command Buttons
Button | Action |
---|---|
Save as | Choose the run location and provide the filename for the OptiStruct input file. |
Radioss | Automatically perform
the following procedures:
|
HyperView | Launch a new session of HyperView and load the resulting .mvw file from the OptiStruct run. (Specifically this loads the .mvw file corresponding to the file name in the input file: field.) |
view .out | View the .out file after a run has been submitted. |