2021.1 API Programmer's Guide

Mapping for LS-DYNA keywords:

The following are examples of how to create and modify an EIGRL card:

• Before – Created as a load collector

  *createentity loadcols name="loadcol1" cardimage="EIGRL"

• After – Created as an analysis parameter

  *createentity analysisparameters name="analysisparam1" real_eigen_type="EIGRL"

• Set the V2 value on the EIGRL card to 500.0

  *setvalue analysisparameters id=$id STATUS=1 v2=500

The following table shows mappings for OptiStruct keywords.

Support for the following OptiStruct keywords has been added.

The following table shows mappings for Nastran keywords.

The following LS-DYNA keywords are mapped from the controlvolumes entity to the referencegeometries entity:

• *INITIAL_FOAM_REFERENCE_GEOMETRY
• *INITIAL_FOAM_REFERENCE_GEOMETRY_RAMP
• *AIRBAG_REFERENCE_GEOMETRY
• *AIRBAG_REFERENCE_GEOMETRY_BIRTH
• *AIRBAG_REFERENCE_GEOMETRY_RDT
• *AIRBAG_REFERENCE_GEOMETRY_ID
• *AIRBAG_REFERENCE_GEOMETRY_BIRTH_RDT
• *AIRBAG_REFERENCE_GEOMETRY_BIRTH_ID
• *AIRBAG_REFERENCE_GEOMETRY_RDT_ID
• *AIRBAG_REFERENCE_GEOMETRY_BIRTH_RDT_ID
• *INITIAL_AIRBAG_PARTICLE_POSITION

The following LS-DYNA keywords are mapped from the tables entity to the referencegeometries entity:

• *AIRBAG_SHELL_REFERENCE_GEOMETRY
• *AIRBAG_SHELL_REFERENCE_GEOMETRY_RDT
• *AIRBAG_SHELL_REFERENCE_GEOMETRY_ID
• *AIRBAG_SHELL_REFERENCE_GEOMETRY_RDT_ID

To create an *INITIAL_FOAM_REFERENCE_GEOMETRY keyword, create referencegeometry with config 101:

*createentity referencegeometries config=101

To create an *AIRBAG_REFERENCE_GEOMETRY keyword, create referencegeometry with config 102:

*createentity referencegeometries config=102

To create an *AIRBAG_SHELL_REFERENCE_GEOMETRY keyword, create referencegeometry with config 103:

*createentity referencegeometries config=103

To create an *INITIAL_AIRBAG_PARTICLE_POSITION keyword, create referencegeometry with config 104:

*createentity referencegeometries config=104

The following Radioss keywords are mapped from the tables entity to the referencegeometries entity:

• /EREF/SH3N
• /EREF/SHELL
• /EREF/TETRA4
• /EREF/BRICK

To create an /XREF keyword, create a referencegeometry entity with config 201:

*createentity referencegeometries config=201

To create an /EREF/SH3N keyword, create a referencegeometry entity with config 202:

*createentity referencegeometries config=202

To create an /EREF/SHELL keyword, create a referencegeometry entity with config 203:

*createentity referencegeometries config=203

To create an /EREF/TETRA4 keyword, create a referencegeometry entity with config 204:

*createentity referencegeometries config=204

To create an /EREF/BRICK keyword, create a referencegeometry entity with config 205:

*createentity referencegeometries config=205

To create a /REFSTA keyword, create a referencegeometry entity with config 206:

*createentity referencegeometries config=206

The following PAM-CRASH keywords are mapped from the controlcards entity to the referencegeometries entity:

• METRIC/ NODES/
• METRIC/ BAR/
• METRIC/ MEMBR/
• METRIC/ TETRA4/
• METRIC/ SOLID/
• METRIC/ PENTA6/
• METRIC/ TETRA10/

To create METRIC/ NODES/, create a referencegeometries entity with config 401:

*createentity referencegeometries config=401

To create METRIC/ BAR/, create a referencegeometries entity with config 402:

*createentity referencegeometries config=402

To create METRIC/ MEMBR/, create a referencegeometries entity with config 403:

*createentity referencegeometries config=403

To create METRIC/ TETRA4/, create a referencegeometries entity with config 404:

*createentity referencegeometries config=404

To create METRIC/ SOLID/, create a referencegeometries entity with config 405:

*createentity referencegeometries config=405

To create METRIC/ PENTA6/, create a referencegeometries entity with config 406:

*createentity referencegeometries config=406

To create METRIC/ TETRA10/, create a referencegeometries entity with config 407:

*createentity referencegeometries config=407

The data defined on a referencegeometry entity is updated using the *setvalue command. To update the definition of a node-based reference geometry:

*setvalue referencegeometries id=$id nodes_table_node={1 2 3 4}
*setvalue referencegeometries id=$id nodes_table_x={0.1 0.2 0.3 0.4}

To update the definition of an element-based reference geometry:

*setvalue referencegeometries id=$id elems_table_elem={1 2 3 4}
*setvalue referencegeometries id=$id elems_table_n1={10 11 12 13}

To update optional parameters, the parameter must be activated first using the corresponding flag:

*setvalue referencegeometries id=$id birthtoggle=1
*setvalue referencegeometries id=$id birth=10.5

• Connector/Attachments
  • hm_ce_getfilteredconfignames
  • *DeleteUC
  • *UpdateController

• Data Names
  • airbagfoldingsequences
  • airbagfolds
  • airbags
  • analysisparameters
  • behaviors
  • referencegeometries
• Feature Recognition
  • *detectandcreatefeatures
  • *validatefeatures
• General/Core
  • hm_getmultilevelreferenceentities
  • hm_visualizeloads
  • *addposition
  • *assignidpooltocweldelements
  • *removeposition
  • *seatbelttensioning
  • *setentitytypesupportedbynamepool
  • *wadlines_windscreenperiphery
• Geometry
  • hm_findthinsolidproximity
  • *create_solid_from_eight_points
  • *external_skin_extraction
  • *multi_trim_by_offset_edges
  • *surfacesplinepatchforholes
• HMASCII
  • *airbagfoldingsequences()
  • *airbagfolds()
  • *airbags()
  • *analysisparameters()
  • *behaviors()
  • *referencegeometries()
• Meshing
  • *hm_trim_elements_with_box
  • *createsinglewallbulkhead
  • *elementquality_move_node
• Template Commands
  • *airbagfoldingsequences()
  • *airbagfolds()
  • *airbags()
  • *analysisparameters()
  • *behaviors()
  • *referencegeometries()
• Template Functions
  • @checkiffreeformat()
  • @getentitydefaultstatus()

The following commands have modified behavior that potentially require script updates:

• Data Names
  • responses - Updated the list of responserequesttype values.
• General/Core
  • hm_getvalue - Resolved an issue with incorrect value being returned for certain colors when querying color entity data name.
• Meshing
  • hm_getbatchparams - Updated the surface_holes_table options.
  • *batchparams_update - Updated the surface_holes_table options.
  • *compute_midmesh_thickness - Added new options RegroupThicknessVariationFactor, RenameRetainedComponents, and ThicknessAssignMethod to enhance thickness grouping. Removed the ThicknessOutputOption value PropertyOnComponents.

The following commands have new options or enhanced capabilities. Existing scripts are not affected and only need to be updated if usage of the new functionality is desired:

• Data Names
  • attachments – Added new data name aegroup.
  • attachmentcontrols - Added new data names createelements, duplicateelems, feature, and maxlayers.
  • connectorgroups – Added new data name attachments.
  • designvars
    • topology - Added new data names holeinst, holerad, levelset, nholesx, nholesy and nholesz.
  • explorations - Added new explorationtype value 3.
  • failures – Added new data name epsp_min, new PAM-CRASH support.
  • features - Added new options associativity,config_color, dim_sides_selection, elem_ids, feature_height, feature_length, feature_minwidth, feature_maxwidth, feature_type, feature_shape, fillet_maxangle, fillet_maxradius, fillet_minangle, fillet_minradius, fillet_ratio, hole_axis, hole_center, hole_ratio, hole_size1, hole_size2, ids, invalid, line_ids, logo_concavityfactor, logo_size, logo_string, node_ids, region_2delems, region_2dedges, region_3delems, region_lines, region_surfs, solidhole_axis, solidhole_blind, solidhole_bottomradmax, solidhole_bottomradmin, solidhole_bottomrims, solidhole_center, solidhole_topradmax, solidhole_topradmin, solidhole_toprims, and surf_ids.
  • loads
    • accelerations – Added new data names for LS-DYNA engineering loads: activation_time, add_part_construct_stage, crash_dir_flag, crash_dofstring and load_body_opt, curveid, deactivation_time, displayname, dyn_relax_evolve_fn, entity_select_option, keyword_name, load_dof, magnitude, motion_rigid_local_option, motion_type, motion_vec_dir, nodal_rigid_body, plane_axis_coord1, plane_axis_coord2, rem_part_construct_stage, rigid_part, rigidbody_option, and vector.
    • constraints – Added new data names for LS-DYNA engineering loads: activation_time, ang_vel_center, curveid, deactivation_time, displayname, dof1, dof2, dof3, dof4, dof5, dof6, inputsystem, keyword_name, load_boundary_nodes, load_dof, magnitude, motion_rigid_local_option, motion_type, motion_vec_dir, nodal_rigid_body, plane_axis_coord1, plane_axis_coord2, plane_node2, plane_node3, rel_disp_ref_body, rigid_part, rigidbody_option, sort_nodes, symmetry_repetition_dir, and time_activate_option.
    • fluxes – Added new data names for LS-DYNA engineering loads: curveid, env_temp_const, env_temp_evolve_fn, magnitude, radiation_type, and thk_shell_surf_temp.
    • forces – Added new data names for LS-DYNA engineering loads: crash_dir_flag, curveid, follower_load, force_ev_fn, inputsystem, load_dof, magnitude, plane_node1, plane_node2, plane_node3, rigid_part and vector.
    • moments – Added new data names for LS-DYNA engineering loads: crash_dir_flag, curveid, follower_load, force_ev_fn, inputsystem, load_dof, magnitude, plane_node1, plane_node2, plane_node3, rigid_part and vector.
    • pressures – Added new data names for LS-DYNA engineering loads: activation_time, beam_axial_dir, box_region_def, curveid, displayname, element_inclusion_option, keyword_name, magnitude, masking_fn_projection_vec, motion_vec_dir, pressure_lower_limit, pressure_mask_fn, rgd_bdy_vel_opt_overwrite, shell_part, and timestep_offset.
    • temperatures – Added new data names for LS-DYNA engineering loads: box_region_def, curveid, dyn_relax_evolve_fn, exempt_node_dyn_rel_temp_sf_evolve_fn, exempt_node_scaled_temp, exempt_node_temp, exempt_node_temp_sf_evolve_fn, exempt_nodes, magnitude, scaled_temp, and thk_shell_surf_temp.
  • modelcheckchecks – Added new data names report and concernedids.
  • modules - Added new data name rep_comment.
  • positions – Added new config value 408 and new data name positions.
  • rbe3 – Added new inputs independentnodesets, independentnodesetcoeffs, independentnodesetidofs, nset, rx, ry, rz, tx, ty, tz, and wt.
  • responses - Added new response value 12.
  • sets – Added new style value 3.
  • topology - Added new data names levelset, holeinst, holerad, nholesx, nholesy, and nholesz.
  • weldlines - Added new data name active_weld_type.
• General/Core
  • hm_holedetectionsettubeparams – Added new input ?merge_connected_barrels=<>?.
  • hm_wadlinessetoptions - Added new options active_hood_method and side_reference_resolution.
  • *detectandcreateface2facecontacts - Added Nastran (NX) support.
  • *setoption/hm_getoption – Added new options geometry_style_view_cube, reflector_show_view_cube, rotator_show_view_cube, topoedgecolorauto and topofacecolorauto. Added new topoedgecolor value 4 and topofacecolor value 28.
  • *swapcards - Added Nastran (NX) support.
• Library
  • *hwct_savetolibrary - Added new option repcomment=<value>.
• Meshing
  • *rbody_mesh - Added new shared_edge_flag values 6, 10, 11, 12, 13, 14, 15, and 16.
  • *update1delements - Added new options connectiontol, contacttol, cutlocation, planebase, planeheight, planenormal, planewidth, refentid, refentname, refentsearchtol, refenttype, taperangle, targetenttype, and targetmark.
• Subsystems
  • *modent_saverepresentation - Added new option repcomment=<value>.

• Data Names
  • attachmentcontrols - Removed data name findhole.
  • loads
    • constraints - Removed data name for Radioss: constraint_flag.
• General/Core
  • *setoption/hm_getoption - Removed topoedgecolor and topofacecolor value 1.